All tabs and brackets are shown on a 1" grid pattern for approximate dimensional reference.

Welding is probably necessary with all of these products.

Orbital control valve bracket. Fits all standard orbital valve column patterns. Two 1/2" holes for bolting to another bracket. Radius fits 1.5" through 2" tube (perfect fit on 1.75" tube). CNC laser cut from 1/4" steel.
$8 each.

Teardrop tab. Originally designed to use for building clevis ends on tierods in full hydraulic steering systems. Has 5/8" hole, but was designed to allow oversizing of hole up to 7/8" for custom fitment.

Typical use of a pair of teardrop tabs.
CNC laser cut from 1/4" steel.
$4 each.

Cylinder base mounting tab. Fits our large double-ended cylinder, or use for any other custom application. Two 1/2" holes, 3.5" on center. 2" wide, so will fit up to 2" tube in the center. CNC laser cut from 1/4" steel.
$4 each.

Stabilizer mount bracket. Has six 3/8" holes. This is the base plate that we use for our stabilizer mounts for up to 1.5" Rock Rod tierod and draglink systems. U-bolts available separately.
$8 each.

Standard (small) cage gusset. 1/8" steel.
$0.50 each.

Lightened gusset/tab #301A. 1/8" steel.
$2.50 each.

Large gusset #94B. 1/8" steel.
$2.50 each.

Universal tab #26A. 3/16" steel, 1/2" hole.
$1.75 each.

Universal tab #27A. 1/8" steel, 1/2" hole.
$1 each.

Universal tab #27C. 1/4" steel, 1/2" hole.
$1 each.

Tube tab. Fits 1.5" tube, 3/16" steel, 1/2" hole.
$2 each.

Universal tab #234B. 3/16" steel, 3/4" hole.
$2 each.

Axle tab #237A. Fits 3" tube, 3/16" steel, 5/8" hole. 3" from axle centerline to hole centerline.
$4 each.

Small 3" axletab. Fits 3" tube, 1/4" steel, 5/8" hole. 3" from axle centerline to hole centerline.
$6.50 each.

Large 3" axletab. Fits 3" tube, 1/4" steel, 3/4" hole. 3" from axle centerline to hole centerline.
$6.50 each.

Large 4" axletab. Fits 3" tube, 1/4" steel, 3/4" hole. 4" from axle centerline to hole centerline.
$6.50 each.

Note: The large 3" and 4" tabs were designed to be used with another of themselves for parallel mounting, or with each other for an angled mount.

Mounting bracket #305A. 1/8" steel, two 3/8" holes, 3" on center.
$3 each.

Mounting bracket #189A. Fits Chevy smallblock and 4.3 mounting pattern. 1/4" steel, three 3/8" holes.
$15 per pair ($8 each if only purchasing one)

Copyright 2003 Rockstomper.com